Containers and seals

Right box, still sealed.

On a container job you check it's the right box and that it's still sealed, at both ends and on the way.


Check the container number

  1. After arriving, tap Scan container. Point the camera at the number and the app reads it. The card shows the booked number and size under "On the job", and counts "EXPECTED ON THIS STOP" up as you confirm.

  2. If it's the same box, tap Number matches. You'll see "Container confirmed" and what you read, in green.

Scan screen with Number matches Container confirmed with the number read in green

If the number is different

  1. Tap Different number? Type what's on the box and type what's painted on it.

  2. If it doesn't match, the app warns "That's not the container on this job." and "Don't move it. Call the office."

  3. If you made a typo, tap I mistyped — check again.

If the number fails its own check digit, the app says "That number doesn't pass its own check digit, so it has probably been read wrong."

Label won't read? Tap Photograph the number to read it from a photo (Android). If it can't, it says "No container number in that photo — type it instead".

Swapping to a different box

If your company allows it and the gate hands you another booking's box, type its number. The app shows "That box is on another job." with the box in front of you and the box you were sent for. Tap Swap to this container to ask the office. The other driver will see "Container went to another truck".


Check the seal

  1. Under "Seal", tap Seal intact — record number.

  2. The seal check sheet opens with your company's questions. Check the "Seal number" and take a "Photo of the seal".

  3. Tap Seal Confirmed.

You'll see "Seal checked — same as the last one recorded", or "Seal … recorded — nothing to check it against yet" the first time.

📷 Screenshot to come: seal check sheet.

If the seal is broken

  1. Tap Seal broken. An alarm shows: "The seal is broken." and "Don't remove it, replace it or throw it away. Keep it, photograph it, and call the office."

  2. Tap Take photo, then Report it. You'll see "Reported, with a photo".

  3. Call the office.

AP number

If your company asks for it at the unload, tap Record AP number under "Inspected by" and enter it.


Seal checks on the way

When a sealed box is on your truck, My Day shows a banner like "No seal check today on …".

  1. Tap the banner to open "What's on board".

  2. Under "SEALED CONTAINERS", tap the box, then Seal intact — record number, and confirm.

The row then shows "Last checked HH:MM · …".


Good to know

  • Once a seal is answered at a stop it can't be changed. Ring the office if you made a mistake.

  • If the app is closed and reopened, you'll need to check the container number again. Your seal answer is kept.

  • Seal checks work offline and send when you have signal.


Need a hand? Talk to your transport office first. For app problems, email support@icos-tms.com or call 0800 001 668 (ext 3).

Feedback received!

Error submitting feedback, please try again later